Q13:
Cambridge IGCSE Physics - 0625 - Supplement Paper 2 2019 Summer Zone 2
Share
Previous
Questions:
13/40
Topic: CH3 - FORCES AND PRESSURE
Solution
Solution is C
PRACTISE
Similar Questions
LEARN
Concepts with Sparky
More Questions from this Topic
Theory
CH3 - FORCES AND PRESSURE
The pressure of a fixed mass of gas in a cylinder is measured. The volume of the gas in the cylinder is then slowly decreased. The temperature of the ...
Winter
3
Theory
CH3 - FORCES AND PRESSURE
The diagrams show two mercury barometers standing side by side. The right-hand diagram shows a tube of bigger diameter, but the diagram is incomplete....
Summer
3
Theory
CH3 - FORCES AND PRESSURE
(a) State the two conditions required for the equilibrium of a body acted upon by a number of forces.1. .................................................
Winter
2
Theory
CH3 - FORCES AND PRESSURE
A student fills two containers with water (density 1.0 g/cm^3) and two with oil (density 0.8 g/cm^3), as shown in the diagrams.In which container is t...
Summer
4
Theory
CH3 - FORCES AND PRESSURE
What is a simple mercury barometer designed to measure?A. the pressure beneath a liquidB. the pressure of a gas supplyC. the pressure of car tyresD. t...
Winter
2
Theory
CH3 - FORCES AND PRESSURE
A water manometer is used to measure the pressure of a gas supply.
When it is attached to the gas supply, the water falls on the left side and rise...
Winter
3
Theory
CH3 - FORCES AND PRESSURE
The molecules of a substance become more closely packed and move more quickly.What is happening to the substance?A A gas is being heated and compresse...
Summer
4
Theory
CH3 - FORCES AND PRESSURE
(a) Complete Fig. 4.1 to show a simple mercury barometer. Insert the correct labels in the boxes. Label with the letter $h$ the measurement required t...
Winter
2
Theory
CH3 - FORCES AND PRESSURE
Liquid X has a density of 1010 kg/m^3. Liquid Y has a density of 950 kg/m^3.The liquids are poured into tubes as shown.Which tube has the greatest pre...
Winter
3
Theory
CH3 - FORCES AND PRESSURE
A chair is placed on protective cups to prevent damage to the carpet underneath it. How do the cups change the area of contact with the carpet and the...
Winter
3
More Questions from year 2019
MCQ
CH1 - MEASUREMENTS AND UNITS
Which quantity can be measured directly using a micrometer screw gauge?
Summer
1
MCQ
CH2 - FORCES AND MOTION
The velocity of an object increases from 30 m/s to 50 m/s in 5.0 seconds.What is the average acceleration of the object?
Summer
1
MCQ
CH2 - FORCES AND MOTION
A heavy metal ball falls vertically downwards through air past four equally spaced levels J, K, L and M.The times taken to fall from one level to the ...
Summer
1
MCQ
CH2 - FORCES AND MOTION
A body is moved from place X to place Y where the gravitational field strength is different. What happens to its mass and to its weight due to the mov...
Summer
1
MCQ
CH1 - MEASUREMENTS AND UNITS
The diagrams show four solid blocks with their dimensions and masses.Which block has the greatest density?
Summer
1
MCQ
CH3 - FORCES AND PRESSURE
A student wishes to determine the spring constant of a spring where it obeys Hooke’s law. Different loads are hung from the spring and its length is...
Summer
1
MCQ
CH2 - FORCES AND MOTION
A mass of 20 kg is held stationary by a rope passing over a frictionless pulley. What is the tension $T$ in the rope?
Summer
2
MCQ
CH2 - FORCES AND MOTION
A boat starts moving across a river at velocity $v$ perpendicular to the river bank. The boat encounters a current along the river of velocity $u$, as...
Summer
1
MCQ
CH2 - FORCES AND MOTION
A ball of mass 0.50 kg falls and hits the floor at 10 m/s. It rebounds at speed 8.0 m/s, as shown. The collision between the ball and the floor las...
Summer
1
MCQ
CH4 - FORCES AND ENERGY
An object falls from the top of a building that is 25 m high. Air resistance is negligible.What is the speed of the object when it hits the ground?
Summer
3
