Q19:
AS & A Level Physics - 9702 Paper 1 2010 Summer Zone 2
Share
Previous
Questions:
19/37
Topic: CH9 - DEFORMATION OF SOLIDS
Solution
Solution is D,D
PRACTISE
Similar Questions
LEARN
Concepts with Sparky
More Questions from this Topic
Theory
CH9 - DEFORMATION OF SOLIDS
(a) State Hooke's law. [1]
(b) The variation of the applied force with the extension for a sample of a material is shown in Fig. 3.1.
...
Summer
10
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define strain. [1]
(b) A copper wire of length 4.0 m has a uniform cross-sectional area of $4.5 \times 10^{-7} \text{ m}^2$.
A tensi...
Summer
3
Theory
CH9 - DEFORMATION OF SOLIDS
(a) The variation of stress with strain for a metal P is shown in Figure 1.
Point E is the elastic limit of the metal.
(i) Use Figure 1 to determi...
Winter
4
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define:
(i) stress [1]
(ii) strain [1]
(b) Two wires X and Y, with equal unstretched lengths of 0.84 m, are suspended ...
Winter
8
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define the Young modulus of a material. [1]
(b) A metal wire P that obeys Hooke’s law is stretched within its limit of proport...
Winter
5
MCQ
CH9 - DEFORMATION OF SOLIDS
A sample of metal is subjected to a force which increases to a maximum value and then decreases back to zero. A force–extension graph for the sa...
Summer
4
MCQ
CH9 - DEFORMATION OF SOLIDS
Two wires, P and Q, made of the same material, are stretched with an increasing force.
A graph is plotted of the variation with force of the extensio...
Summer
5
MCQ
CH9 - DEFORMATION OF SOLIDS
An extension–force graph for a spring is shown.
What is the spring constant of the spring?
Summer
3
MCQ
CH9 - DEFORMATION OF SOLIDS
What is a unit for stress?
Winter
6
MCQ
CH9 - DEFORMATION OF SOLIDS
A wire has original length $L$ and cross-sectional area $A$. A tensile force $F$ is applied to the wire which causes it to have extension $x$. The wir...
Winter
4
More Questions from year 2010
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
The SI unit for potential difference (the volt) is given, in base units, by
Summer
1
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
The product of pressure and volume has the same SI base units as
Summer
3
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
An ion is accelerated by a series of electrodes in a vacuum. A graph of the power supplied to the ion is plotted against time.What is represented by t...
Summer
1
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
A vector quantity $V$ is resolved into two perpendicular components $X$ and $Y$. The angle between $V$ and component $X$ is $\theta$. The angle betwee...
Summer
1
MCQ
CH3 - KINEMATICS
The diagram shows a velocity-time graph for a vehicle.
The vehicle, moving at 4.0 ms-1, begins to accelerate at time = 0.
What is the vehicle's ac...
Summer
2
MCQ
CH3 - KINEMATICS
A small steel ball falls freely under gravity after being released from rest.
Which graph best represents the variation of the height $h$ of the ball...
Summer
1
MCQ
CH4 - DYNAMICS
Two equal masses travel towards each other on a frictionless air track at speeds of $60 \text{ cm s}^{-1}$ and $40 \text{ cm s}^{-1}$. They stick toge...
Summer
2
MCQ
CH4 - DYNAMICS
A brick weighing 20 N rests on an inclined plane. The weight of the brick has a component of 10 N parallel with the plane. The brick also experiences ...
Summer
2
MCQ
CH4 - DYNAMICS
The diagram shows two identical spheres X and Y.
Initially, X moves with speed v directly towards Y. Y is stationary. The spheres collide elastical...
Summer
3
MCQ
CH5 - FORCES, DENSITY & PRESSURE
Forces of 3 N, 4 N and 5 N act at one point on an object. The angles at which the forces act can vary.
What is the value of the minimum resultant for...
Summer
3