Q3:
AS & A Level Physics - 9702 Paper 2 2024 Winter Zone 2
Share
Previous
Questions:
3/6
Topic: CH9 - DEFORMATION OF SOLIDS
Solution
PRACTISE
Similar Questions
LEARN
Concepts with Sparky
More Questions from this Topic
Theory
CH9 - DEFORMATION OF SOLIDS
(a) State Hooke's law. [1]
(b) The variation of the applied force with the extension for a sample of a material is shown in Fig. 3.1.
...
Summer
10
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define strain. [1]
(b) A copper wire of length 4.0 m has a uniform cross-sectional area of $4.5 \times 10^{-7} \text{ m}^2$.
A tensi...
Summer
3
Theory
CH9 - DEFORMATION OF SOLIDS
(a) The variation of stress with strain for a metal P is shown in Figure 1.
Point E is the elastic limit of the metal.
(i) Use Figure 1 to determi...
Winter
4
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define:
(i) stress [1]
(ii) strain [1]
(b) Two wires X and Y, with equal unstretched lengths of 0.84 m, are suspended ...
Winter
8
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define the Young modulus of a material. [1]
(b) A metal wire P that obeys Hooke’s law is stretched within its limit of proport...
Winter
4
MCQ
CH9 - DEFORMATION OF SOLIDS
A sample of metal is subjected to a force which increases to a maximum value and then decreases back to zero. A force–extension graph for the sa...
Summer
4
MCQ
CH9 - DEFORMATION OF SOLIDS
Two wires, P and Q, made of the same material, are stretched with an increasing force.
A graph is plotted of the variation with force of the extensio...
Summer
4
MCQ
CH9 - DEFORMATION OF SOLIDS
An extension–force graph for a spring is shown.
What is the spring constant of the spring?
Summer
3
MCQ
CH9 - DEFORMATION OF SOLIDS
What is a unit for stress?
Winter
6
MCQ
CH9 - DEFORMATION OF SOLIDS
A wire has original length $L$ and cross-sectional area $A$. A tensile force $F$ is applied to the wire which causes it to have extension $x$. The wir...
Winter
4
More Questions from year 2024
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
Which unit is an SI base unit?
Summer
3
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
Which of the following could have the same units as force?
Summer
3
MCQ
CH3 - KINEMATICS
The velocity of an object changes from an initial velocity $u$ to a final velocity $v$. The vectors represent these velocities.
Which single vector r...
Summer
8
MCQ
CH3 - KINEMATICS
An object is moving with initial velocity $u$. The object then moves with uniform acceleration $a$ for time $t$ until it reaches final velocity $v$.
...
Summer
4
MCQ
CH3 - KINEMATICS
Which calculation produces a vector quantity?
Summer
4
MCQ
CH2 - MEASUREMENT TECHNIQUES
A thermometer can be read to an accuracy of ±0.5°C. This thermometer is used to measure a temperature rise from 40°C to 100°C. What is the percent...
Summer
4
MCQ
CH3 - KINEMATICS
The diagram shows the path of a golf ball.
Which row describes changes in the horizontal and vertical components of the golf ball’s velocity ...
Summer
4
MCQ
CH3 - KINEMATICS
An aircraft flies from London to Sydney in a time of 21 hours 40 minutes.
The distance travelled is 17 000 km.
What is the average speed of the airc...
Summer
3
MCQ
CH3 - KINEMATICS
A golf club hits a golf ball. The graph shows how the force $F$ on the ball varies with time $t$.
Which graph shows how the velocity $v$ of the bal...
Summer
3
MCQ
CH4 - DYNAMICS
What is meant by the mass and by the weight of an object on the Earth?
Summer
5