Q24:
AS & A Level Physics - 9702 Paper 1 2012 Summer Zone 2
Share
Previous
Questions:
24/40
Topic: CH9 - DEFORMATION OF SOLIDS
Solution
Solution is B,B
PRACTISE
Similar Questions
LEARN
Concepts with Sparky
More Questions from this Topic
Theory
CH9 - DEFORMATION OF SOLIDS
(a) State Hooke's law. [1]
(b) The variation of the applied force with the extension for a sample of a material is shown in Fig. 3.1.
...
Summer
10
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define strain. [1]
(b) A copper wire of length 4.0 m has a uniform cross-sectional area of $4.5 \times 10^{-7} \text{ m}^2$.
A tensi...
Summer
3
Theory
CH9 - DEFORMATION OF SOLIDS
(a) The variation of stress with strain for a metal P is shown in Figure 1.
Point E is the elastic limit of the metal.
(i) Use Figure 1 to determi...
Winter
4
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define:
(i) stress [1]
(ii) strain [1]
(b) Two wires X and Y, with equal unstretched lengths of 0.84 m, are suspended ...
Winter
8
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define the Young modulus of a material. [1]
(b) A metal wire P that obeys Hooke’s law is stretched within its limit of proport...
Winter
5
MCQ
CH9 - DEFORMATION OF SOLIDS
A sample of metal is subjected to a force which increases to a maximum value and then decreases back to zero. A force–extension graph for the sa...
Summer
4
MCQ
CH9 - DEFORMATION OF SOLIDS
Two wires, P and Q, made of the same material, are stretched with an increasing force.
A graph is plotted of the variation with force of the extensio...
Summer
5
MCQ
CH9 - DEFORMATION OF SOLIDS
An extension–force graph for a spring is shown.
What is the spring constant of the spring?
Summer
3
MCQ
CH9 - DEFORMATION OF SOLIDS
What is a unit for stress?
Winter
6
MCQ
CH9 - DEFORMATION OF SOLIDS
A wire has original length $L$ and cross-sectional area $A$. A tensile force $F$ is applied to the wire which causes it to have extension $x$. The wir...
Winter
4
More Questions from year 2012
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
When a force $F$ moves its point of application through a displacement $s$ in the direction of the force, the work $W$ done by the force is given by $...
Summer
3
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
What is a possible unit for the product $VI$, where $V$ is the potential difference across a resistor and $I$ is the current through the same resistor...
Summer
2
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
What is a reasonable estimate of the average kinetic energy of an athlete during a 100 m race that takes 10 s?
Summer
3
MCQ
CH2 - MEASUREMENT TECHNIQUES
A light-meter measures the intensity $I$ of the light falling on it. Theory suggests that $I$ varies inversely as the square of the distance $d$.
W...
Summer
3
MCQ
CH2 - MEASUREMENT TECHNIQUES
In an experiment, a radio-controlled car takes $2.50 \pm 0.05$ s to travel $40.0 \pm 0.1$ m.
What is the car’s average speed and the uncertaint...
Summer
2
MCQ
CH3 - KINEMATICS
In an experiment to determine the acceleration of free fall using a falling body, what would lead to a value that is too large?
Summer
3
MCQ
CH3 - KINEMATICS
Which feature of a graph allows acceleration to be determined?
Summer
3
MCQ
CH3 - KINEMATICS
The diagram shows a laboratory experiment in which a feather falls from rest in a long evacuated vertical tube of length $L$.
The feather takes tim...
Summer
3
MCQ
CH3 - KINEMATICS
In the absence of air resistance, a stone is thrown from P and follows a parabolic path in which the highest point reached is T. The stone reaches poi...
Summer
3
MCQ
CH5 - FORCES, DENSITY & PRESSURE
Each option gives a correct word equation involving force. Which option gives the definition of force?
Summer
3