Past Papers
Q22: AS & A Level Physics - 9702 Paper 1 2013 Summer Zone 2
1
0
Share
Questions: 22/40
Topic: CH9 - DEFORMATION OF SOLIDS
Solution

Solution is B,B

PRACTISE
Similar Questions
LEARN
Concepts with Sparky
Close Icon

More Questions from this Topic

Theory
CH9 - DEFORMATION OF SOLIDS
(a) State Hooke's law.    [1] (b) The variation of the applied force with the extension for a sample of a material is shown in Fig. 3.1. ...
2024 Summer
10
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define strain.   [1] (b) A copper wire of length 4.0 m has a uniform cross-sectional area of $4.5 \times 10^{-7} \text{ m}^2$. A tensi...
2024 Summer
3
Theory
CH9 - DEFORMATION OF SOLIDS
(a) The variation of stress with strain for a metal P is shown in Figure 1. Point E is the elastic limit of the metal. (i) Use Figure 1 to determi...
2024 Winter
4
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define: (i) stress   [1] (ii) strain    [1] (b) Two wires X and Y, with equal unstretched lengths of 0.84 m, are suspended ...
2024 Winter
8
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define the Young modulus of a material.    [1] (b) A metal wire P that obeys Hooke’s law is stretched within its limit of proport...
2024 Winter
5
MCQ
CH9 - DEFORMATION OF SOLIDS
A sample of metal is subjected to a force which increases to a maximum value and then decreases back to zero. A force–extension graph for the sa...
2024 Summer
4
MCQ
CH9 - DEFORMATION OF SOLIDS
Two wires, P and Q, made of the same material, are stretched with an increasing force. A graph is plotted of the variation with force of the extensio...
2024 Summer
5
MCQ
CH9 - DEFORMATION OF SOLIDS
An extension–force graph for a spring is shown. What is the spring constant of the spring? 
2024 Summer
3
MCQ
CH9 - DEFORMATION OF SOLIDS
What is a unit for stress?
2024 Winter
6
MCQ
CH9 - DEFORMATION OF SOLIDS
A wire has original length $L$ and cross-sectional area $A$. A tensile force $F$ is applied to the wire which causes it to have extension $x$. The wir...
2024 Winter
4

More Questions from year 2013

MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
Which pair of quantities contains one vector and one scalar quantity?
2013 Summer
2
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
One property Q of a material is used to describe the behaviour of sound waves in the material. Q is defined as the pressure P of the sound wave divide...
2013 Summer
2
MCQ
CH3 - KINEMATICS
A cannon fires a cannonball with an initial speed $v$ at an angle $\alpha$ to the horizontal. Which equation is correct for the maximum height $H$ re...
2013 Summer
3
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
A wave has a frequency of 5 GHz. What is the period of the wave?
2013 Summer
3
MCQ
CH2 - MEASUREMENT TECHNIQUES
In an experiment to determine the acceleration of free fall $g$, the period of oscillation $T$ and length $l$ of a simple pendulum were measured. The ...
2013 Summer
2
MCQ
CH2 - MEASUREMENT TECHNIQUES
The Y-input terminals of a cathode-ray oscilloscope (c.r.o.) are connected to a supply of amplitude 5.0 V and frequency 50 Hz. The time-base is set at...
2013 Summer
2
MCQ
CH3 - KINEMATICS
A body is released from rest and falls vertically in air of constant density. Which statement about the motion of the falling body is correct?
2013 Summer
2
MCQ
CH3 - KINEMATICS
A goods train passes through a station at a steady speed of 10 m s$^{-1}$. An express train is at rest at the station. The express train leaves the st...
2013 Summer
2
MCQ
CH3 - KINEMATICS
A car is stationary at traffic lights. When the traffic lights go green, the driver presses down sharply on the accelerator. The resultant horizontal ...
2013 Summer
2
MCQ
CH4 - DYNAMICS
Which of the following is a statement of the principle of conservation of momentum?
2013 Summer
2