Q1:
AS & A Level Physics - 9702 Paper 1 2016 Winter Zone 3
Share
Previous
Questions:
1/40
Topic: CH9 - DEFORMATION OF SOLIDS
Solution
Solution is D,D
PRACTISE
Similar Questions
LEARN
Concepts with Sparky
More Questions from this Topic
Theory
CH9 - DEFORMATION OF SOLIDS
(a) State Hooke's law. [1]
(b) The variation of the applied force with the extension for a sample of a material is shown in Fig. 3.1.
...
Summer
10
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define strain. [1]
(b) A copper wire of length 4.0 m has a uniform cross-sectional area of $4.5 \times 10^{-7} \text{ m}^2$.
A tensi...
Summer
3
Theory
CH9 - DEFORMATION OF SOLIDS
(a) The variation of stress with strain for a metal P is shown in Figure 1.
Point E is the elastic limit of the metal.
(i) Use Figure 1 to determi...
Winter
4
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define:
(i) stress [1]
(ii) strain [1]
(b) Two wires X and Y, with equal unstretched lengths of 0.84 m, are suspended ...
Winter
8
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define the Young modulus of a material. [1]
(b) A metal wire P that obeys Hooke’s law is stretched within its limit of proport...
Winter
5
MCQ
CH9 - DEFORMATION OF SOLIDS
A sample of metal is subjected to a force which increases to a maximum value and then decreases back to zero. A force–extension graph for the sa...
Summer
4
MCQ
CH9 - DEFORMATION OF SOLIDS
Two wires, P and Q, made of the same material, are stretched with an increasing force.
A graph is plotted of the variation with force of the extensio...
Summer
5
MCQ
CH9 - DEFORMATION OF SOLIDS
An extension–force graph for a spring is shown.
What is the spring constant of the spring?
Summer
3
MCQ
CH9 - DEFORMATION OF SOLIDS
What is a unit for stress?
Winter
6
MCQ
CH9 - DEFORMATION OF SOLIDS
A wire has original length $L$ and cross-sectional area $A$. A tensile force $F$ is applied to the wire which causes it to have extension $x$. The wir...
Winter
4
More Questions from year 2016
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
Which quantity with its unit is correct?
Summer
2
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
The luminosity $L$ of a star is given by $L = 4\pi r^2 \sigma T^4$ where $r$ is the radius of the star, $T$ is the temperature of the star, $\sig...
Summer
3
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
The diagram shows two vectors X and Y, drawn to scale. If X = Y − Z, which diagram best represents the vector Z?
Summer
3
MCQ
CH2 - MEASUREMENT TECHNIQUES
The diagram shows a cathode-ray oscilloscope (c.r.o.) being used to measure the rate of rotation of a flywheel.The flywheel has a small magnet M mount...
Summer
2
MCQ
CH2 - MEASUREMENT TECHNIQUES
A student determines the density $\rho$ of steel by taking measurements from a steel wire. mass $m = 6.2 \pm 0.1 \text{ g}$ length $l = 25.0 \pm 0.1 \...
Summer
3
MCQ
CH3 - KINEMATICS
The acceleration of free fall on the Moon is $1.6 \, \text{m}\,\text{s}^{-2}$. The Moon has no atmosphere. An astronaut standing on the surface of the...
Summer
2
MCQ
CH3 - KINEMATICS
A tennis ball is released from rest at the top of a tall building. Which graph best represents the variation with time $t$ of the acceleration $a$ of ...
Summer
3
MCQ
CH3 - KINEMATICS
The graph shows how the velocity $v$ of an object moving in a straight line varies with time $t$ from $t = 0$ to $t = T$.
Which graph represents th...
Summer
3
MCQ
CH4 - DYNAMICS
A ball falls vertically onto horizontal ground and rebounds, as shown.
The ball has momentum $p_1$ downwards just before hitting the ground. After ...
Summer
3
MCQ
CH4 - DYNAMICS
A sphere falls from rest through the air. The graph shows the variation with time of the sphere’s velocity.
Which diagram shows the forces ac...
Summer
3