Q8:
AS & A Level Physics - 9702 Paper 1 2022 Summer Zone 1
Share
Previous
Questions:
8/40
Topic: CH5 - FORCES, DENSITY & PRESSURE
Solution
Solution is D,D
PRACTISE
Similar Questions
LEARN
Concepts with Sparky
More Questions from this Topic
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) Define density. [1]
(b) Figure 1 shows a cuboidal glass block.
A student measures the mass $m$ of the block and the side lengths $...
Winter
5
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) State what is meant by a vector quantity [2]
(b) A sphere falls vertically through a liquid that has density $830 \text{ kg m}^{-3}$. The sphere ...
Winter
5
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) Define density. [1]
(b) Figure 1 shows a cuboidal glass block.
A student measures the mass $m$ of the block and the side lengths $...
Winter
5
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) State what is meant by a vector quantity [2]
(b) A sphere falls vertically through a liquid that has density $830 \text{ kg m}^{-3}$. The sphere ...
Winter
5
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) State the principle of moments. [1]
(b) A rigid uniform beam rests on a pivot at its centre, as shown in Figure 1.
A load of...
Winter
7
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) State the principle of moments. [1]
(b) A rigid uniform beam rests on a pivot at its centre, as shown in Figure 1.
A load of...
Winter
7
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) The variation of stress with strain for a metal P is shown in Figure 1.
Point E is the elastic limit of the metal.
(i) Use Figure 1 to determi...
Winter
4
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) The variation of stress with strain for a metal P is shown in Figure 1.
Point E is the elastic limit of the metal.
(i) Use Figure 1 to determi...
Winter
4
MCQ
CH5 - FORCES, DENSITY & PRESSURE
Which single condition must apply for an object to be in equilibrium?
Winter
4
MCQ
CH5 - FORCES, DENSITY & PRESSURE
Which single condition must apply for an object to be in equilibrium?
Winter
4
More Questions from year 2022
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
Which term represents a physical quantity?
Summer
2
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
Which two units are identical when expressed in terms of SI base units?
Summer
2
MCQ
CH2 - MEASUREMENT TECHNIQUES
A value for the acceleration of free fall on Earth is given as $(10 \pm 2) \text{ m s}^{-2}$.Which statement is correct?
Summer
3
MCQ
CH3 - KINEMATICS
Two cables are attached to a bracket and exert forces as shown.
What are the magnitudes of the horizontal and vertical components of the resultant ...
Summer
3
MCQ
CH3 - KINEMATICS
The curved line PQR is the velocity–time graph for a car starting from rest.
What is the average acceleration of the car over the first 5 s?
Summer
4
MCQ
CH3 - KINEMATICS
A ball is thrown horizontally with a speed of 10.0 \text{ ms}^{-1} above horizontal ground. The ball hits the ground after a time of 3.0 s.
Air resis...
Summer
3
MCQ
CH3 - KINEMATICS
An object is moving along the ground in a straight line at a constant speed. Which statement about the resultant force acting on the object is correct...
Summer
4
MCQ
CH5 - FORCES, DENSITY & PRESSURE
Water flows out of a pipe and hits a wall.
When the jet of water hits the wall, it has horizontal velocity $v$ and cross-sectional area $A$.
The d...
Summer
3
MCQ
CH5 - FORCES, DENSITY & PRESSURE
A projectile is launched at an angle above horizontal ground and travels through the air.
The projectile reaches its maximum height at position X. ...
Summer
2
MCQ
CH5 - FORCES, DENSITY & PRESSURE
What is a statement of the principle of conservation of momentum?
Summer
2