Past Papers
Q20: AS & A Level Physics - 9702 Paper 1 2022 Summer Zone 3
3
0
Share
Questions: 20/40
Topic: CH9 - DEFORMATION OF SOLIDS
Solution

Solution is C,C

PRACTISE
Similar Questions
LEARN
Concepts with Sparky
Close Icon

More Questions from this Topic

Theory
CH9 - DEFORMATION OF SOLIDS
(a) State Hooke's law.    [1] (b) The variation of the applied force with the extension for a sample of a material is shown in Fig. 3.1. ...
2024 Summer
10
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define strain.   [1] (b) A copper wire of length 4.0 m has a uniform cross-sectional area of $4.5 \times 10^{-7} \text{ m}^2$. A tensi...
2024 Summer
3
Theory
CH9 - DEFORMATION OF SOLIDS
(a) The variation of stress with strain for a metal P is shown in Figure 1. Point E is the elastic limit of the metal. (i) Use Figure 1 to determi...
2024 Winter
4
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define: (i) stress   [1] (ii) strain    [1] (b) Two wires X and Y, with equal unstretched lengths of 0.84 m, are suspended ...
2024 Winter
8
Theory
CH9 - DEFORMATION OF SOLIDS
(a) Define the Young modulus of a material.    [1] (b) A metal wire P that obeys Hooke’s law is stretched within its limit of proport...
2024 Winter
5
MCQ
CH9 - DEFORMATION OF SOLIDS
A sample of metal is subjected to a force which increases to a maximum value and then decreases back to zero. A force–extension graph for the sa...
2024 Summer
4
MCQ
CH9 - DEFORMATION OF SOLIDS
Two wires, P and Q, made of the same material, are stretched with an increasing force. A graph is plotted of the variation with force of the extensio...
2024 Summer
5
MCQ
CH9 - DEFORMATION OF SOLIDS
An extension–force graph for a spring is shown. What is the spring constant of the spring? 
2024 Summer
3
MCQ
CH9 - DEFORMATION OF SOLIDS
What is a unit for stress?
2024 Winter
6
MCQ
CH9 - DEFORMATION OF SOLIDS
A wire has original length $L$ and cross-sectional area $A$. A tensile force $F$ is applied to the wire which causes it to have extension $x$. The wir...
2024 Winter
4

More Questions from year 2022

MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
Which term represents a physical quantity?
2022 Summer
2
MCQ
CH1 - PHYSICAL QUANTITIES & UNITS
Which two units are identical when expressed in terms of SI base units?
2022 Summer
2
MCQ
CH2 - MEASUREMENT TECHNIQUES
A value for the acceleration of free fall on Earth is given as $(10 \pm 2) \text{ m s}^{-2}$.Which statement is correct?
2022 Summer
3
MCQ
CH3 - KINEMATICS
Two cables are attached to a bracket and exert forces as shown. What are the magnitudes of the horizontal and vertical components of the resultant ...
2022 Summer
3
MCQ
CH3 - KINEMATICS
The curved line PQR is the velocity–time graph for a car starting from rest. What is the average acceleration of the car over the first 5 s?
2022 Summer
4
MCQ
CH3 - KINEMATICS
A ball is thrown horizontally with a speed of 10.0 \text{ ms}^{-1} above horizontal ground. The ball hits the ground after a time of 3.0 s. Air resis...
2022 Summer
3
MCQ
CH3 - KINEMATICS
An object is moving along the ground in a straight line at a constant speed. Which statement about the resultant force acting on the object is correct...
2022 Summer
4
MCQ
CH5 - FORCES, DENSITY & PRESSURE
Water flows out of a pipe and hits a wall. When the jet of water hits the wall, it has horizontal velocity $v$ and cross-sectional area $A$. The d...
2022 Summer
3
MCQ
CH5 - FORCES, DENSITY & PRESSURE
A projectile is launched at an angle above horizontal ground and travels through the air. The projectile reaches its maximum height at position X. ...
2022 Summer
2
MCQ
CH5 - FORCES, DENSITY & PRESSURE
What is a statement of the principle of conservation of momentum?
2022 Summer
2