Q3:
AS & A Level Physics - 9702 Paper 2 2009 Summer Zone 1
Share
Previous
Questions:
3/8
Topic: CH5 - FORCES, DENSITY & PRESSURE
Solution
PRACTISE
Similar Questions
LEARN
Concepts with Sparky
More Questions from this Topic
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) Define density. [1]
(b) Figure 1 shows a cuboidal glass block.
A student measures the mass $m$ of the block and the side lengths $...
Winter
5
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) State what is meant by a vector quantity [2]
(b) A sphere falls vertically through a liquid that has density $830 \text{ kg m}^{-3}$. The sphere ...
Winter
5
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) Define density. [1]
(b) Figure 1 shows a cuboidal glass block.
A student measures the mass $m$ of the block and the side lengths $...
Winter
5
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) State what is meant by a vector quantity [2]
(b) A sphere falls vertically through a liquid that has density $830 \text{ kg m}^{-3}$. The sphere ...
Winter
5
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) State the principle of moments. [1]
(b) A rigid uniform beam rests on a pivot at its centre, as shown in Figure 1.
A load of...
Winter
7
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) State the principle of moments. [1]
(b) A rigid uniform beam rests on a pivot at its centre, as shown in Figure 1.
A load of...
Winter
7
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) The variation of stress with strain for a metal P is shown in Figure 1.
Point E is the elastic limit of the metal.
(i) Use Figure 1 to determi...
Winter
4
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) The variation of stress with strain for a metal P is shown in Figure 1.
Point E is the elastic limit of the metal.
(i) Use Figure 1 to determi...
Winter
4
MCQ
CH5 - FORCES, DENSITY & PRESSURE
Which single condition must apply for an object to be in equilibrium?
Winter
4
MCQ
CH5 - FORCES, DENSITY & PRESSURE
Which single condition must apply for an object to be in equilibrium?
Winter
4
More Questions from year 2009
Theory
CH2 - MEASUREMENT TECHNIQUES
(a) State the most appropriate instrument, or instruments, for the measurement of the following.
(i) the diameter of a wire of diameter about 1 mm [1...
Summer
3
Theory
CH4 - DYNAMICS
A ball B of mass 1.2 kg travelling at constant velocity collides head-on with a stationary ball S of mass 3.6 kg, as shown in Fig. 2.1.
Frictional ...
Summer
3
Theory
CH5 - FORCES, DENSITY & PRESSURE
(a) Define the $\emph{torque}$ of a couple. [2]
(b) A torque wrench is a type of spanner for tightening a nut and bolt to a particular to...
Summer
2
Theory
CH9 - DEFORMATION OF SOLIDS
A spring having spring constant $k$ hangs vertically from a fixed point. A load of weight $L$, when hung from the spring, causes an extension $e$. The...
Summer
3
Theory
CH15 - SUPERPOSITION
Two sources $S_1$ and $S_2$ of sound are situated 80 cm apart in air, as shown in Fig. 5.1.
The frequency of vibration can be varied. The two sourc...
Summer
3
Theory
CH17 - ELECTRIC FIELDS
Two vertical parallel metal plates are situated 2.50 cm apart in a vacuum. The potential difference between the plates is 350V, as shown in Fig. 6.1.A...
Summer
3
Theory
CH20 - D.C. CIRCUITS
A network of resistors, each of resistance $R$, is shown in Fig. 7.1.(a) Calculate the total resistance, in terms of $R$, between points(i) A and C,re...
Summer
3
Theory
CH26 - PARTICLE & NUCLEAR PHYSICS
The spontaneous and random decay of a radioactive substance involves the emission of either $\alpha$-radiation or $\beta$-radiation and/or $\gamma$-ra...
Summer
3
Theory
CH1 - PHYSICAL QUANTITIES & UNITS
In this experiment you will investigate how the current in a circuit depends on the arrangement of resistors within the circuit. You have been provide...
Summer
3
Theory
CH1 - PHYSICAL QUANTITIES & UNITS
In this experiment you will investigate the angle of tilt of a bottle when it contains different amounts of water.
(a) (i) Use the water supplied to ...
Summer
3