X-rays play a pivotal role in modern medical diagnostics by enabling the visualization of internal body structures. Understanding the production and application of X-rays, as well as the concept of contrast in imaging, is essential for students studying Medical Physics at the AS & A Level (Physics - 9702). This article delves into the mechanisms of X-ray imaging, elucidates the significance of contrast, and explores advanced concepts relevant to the field.

Key Concepts

1. Production of X-rays

X-rays are a form of electromagnetic radiation with wavelengths ranging from 0.01 to 10 nanometers, corresponding to frequencies between $3 \times 10^{16}$ Hz and $3 \times 10^{19}$ Hz. They are produced in X-ray tubes through the acceleration of electrons and their subsequent interaction with a metal target.

When high-speed electrons strike the anode (typically made of tungsten), their kinetic energy is converted into X-rays. This process occurs in two primary ways: Bremsstrahlung and characteristic radiation.

Bremsstrahlung: Also known as "braking radiation," it occurs when electrons are decelerated by the electric field of the metal nuclei, causing the emission of a continuous spectrum of X-rays.
Characteristic Radiation: This type of radiation is emitted when electrons from higher energy levels fill vacancies in lower energy levels of the metal atoms, resulting in X-rays with specific energies characteristic of the target material.

The energy ($E$) of the emitted X-rays can be described by the equation: $$ E = h \nu $$ where $h$ is Planck's constant ($6.626 \times 10^{-34}$ J.s) and $\nu$ is the frequency of the radiation.

2. Interaction of X-rays with Matter

Once produced, X-rays interact with biological tissues to create images. The primary interactions include:

Photoelectric Effect: Occurs when an X-ray photon is completely absorbed by an atom, ejecting an inner-shell electron. This effect is more pronounced at lower photon energies and with higher atomic number (Z) elements.
Compton Scattering: Involves the partial absorption of an X-ray photon, resulting in the photon being scattered at a different angle with reduced energy. This is more significant at higher photon energies and lower Z materials.

The probability of each interaction is influenced by the energy of the X-rays and the atomic number of the tissues they encounter, which directly affects image contrast.

3. X-ray Imaging Techniques

Several X-ray imaging modalities are employed in medical diagnostics:

Conventional Radiography: Produces two-dimensional images by passing X-rays through the body and capturing the transmitted rays on film or digital detectors.
Computed Tomography (CT): Utilizes multiple X-ray measurements taken from different angles to create cross-sectional images of the body, allowing for more detailed analysis.
Fluoroscopy: Provides real-time moving images of internal structures, useful for guiding medical procedures.

4. Importance of Contrast in X-ray Imaging

Contrast refers to the difference in X-ray absorption between different tissues, which enables the differentiation of structures within the body. High contrast is essential for clear and diagnostically useful images.

Several factors influence contrast:

Atomic Number (Z): Tissues with higher atomic numbers (e.g., bones containing calcium) absorb X-rays more effectively, resulting in greater contrast compared to soft tissues.
X-ray Energy: Lower energy X-rays increase contrast as they are more readily absorbed by tissues, but excessive energy can reduce image clarity.
Use of Contrast Agents: Substances like iodine or barium may be introduced into the body to enhance contrast in specific areas, aiding in the visualization of blood vessels and the gastrointestinal tract.

5. Safety and Radiation Dose

Exposure to X-rays involves ionizing radiation, which can pose health risks. Therefore, controlling the radiation dose is crucial:

ALARA Principle: "As Low As Reasonably Achievable" emphasizes minimizing radiation exposure while achieving the necessary image quality.
Shielding and Protective Measures: Use of lead aprons and shields protects non-targeted areas from unnecessary exposure.
Dose Optimization: Balancing factors like X-ray energy, exposure time, and distance from the source to minimize dose.

6. Image Formation and Visualization

The formation of an X-ray image depends on the differential absorption of X-rays by various tissues:

Radiographic Density: Refers to the degree of darkness on the X-ray film, indicating the density of the material.
Contrast Resolution: The ability to distinguish between fine differences in density, crucial for detecting subtle abnormalities.

Modern digital detectors have enhanced image quality, allowing for better contrast resolution and reduced radiation doses compared to traditional film-based methods.

7. Quantitative Measurements in X-ray Imaging

Quantitative metrics are used to assess the quality and efficiency of X-ray imaging:

Hounsfield Units (HU): A scale used in CT imaging to quantify radiodensity, where water is defined as 0 HU and air as -1000 HU.
Signal-to-Noise Ratio (SNR): Measures the clarity of the image by comparing the level of desired signal to the background noise.

Understanding these measurements aids in optimizing imaging protocols for accurate diagnostics.

Advanced Concepts

1. Mathematical Modeling of X-ray Absorption

The absorption of X-rays in matter is quantitatively described by the Beer-Lambert Law: $$ I = I_0 e^{-\mu x} $$ where:

$I$ is the transmitted intensity.
$I_0$ is the initial X-ray intensity.
$\mu$ is the linear attenuation coefficient.
$x$ is the thickness of the material.

The linear attenuation coefficient ($\mu$) depends on the material's density and atomic number, as well as the energy of the X-rays. This equation forms the basis for calculating the required X-ray doses and understanding image contrast.

2. Contrast Agents and Their Mechanisms

Contrast agents enhance the differential absorption of X-rays in specific tissues:

Iodine-based Agents: Commonly used for vascular imaging; iodine has a high atomic number, increasing X-ray absorption in blood vessels.
Barium Sulfate: Utilized in gastrointestinal imaging to outline the digestive tract.

The choice of contrast agent depends on the target area and the specific diagnostic requirements. Understanding the chemical properties and safety profiles of these agents is crucial for their effective application.

3. Advanced Imaging Techniques

Beyond conventional methods, advanced techniques offer improved diagnostic capabilities:

Dual-Energy X-ray Absorptiometry (DEXA): Measures bone mineral density, aiding in the diagnosis of osteoporosis.
Digital Subtraction Angiography (DSA): Enhances vascular imaging by subtracting pre-contrast images from post-contrast images, highlighting blood flow.

These techniques leverage the principles of X-ray interaction with matter and contrast enhancement to provide more detailed and specific images.

4. Interdisciplinary Connections

X-ray imaging intersects with various fields, showcasing its broad applicability:

Biomedical Engineering: Development of advanced X-ray detectors and imaging software.
Radiation Physics: Study of radiation-matter interactions and dose calculations.
Chemistry: Design and synthesis of effective contrast agents.

These interdisciplinary connections foster innovations that enhance the efficacy and safety of X-ray imaging in medical diagnostics.

5. Computational Techniques in Image Reconstruction

Modern imaging relies heavily on computational methods for image reconstruction:

Filtered Back Projection (FBP): A traditional algorithm used in CT to reconstruct images from projection data.
Iterative Reconstruction: An advanced technique that iteratively refines the image, reducing noise and improving quality.

These computational approaches are essential for processing the vast amounts of data generated during imaging procedures, ensuring accurate and high-quality diagnostic images.

6. Radiation Protection and Dose Calculation

Ensuring patient and operator safety involves comprehensive radiation protection strategies:

Personal Protective Equipment (PPE): Utilization of lead aprons, gloves, and thyroid shields to minimize exposure.
Dose Monitoring: Regular assessment of radiation doses using dosimeters to track cumulative exposure.
Shielding Design: Engineering control measures such as lead-lined rooms and barriers to protect against scatter radiation.

Accurate dose calculation is imperative for maintaining safety standards and adhering to regulatory guidelines in medical settings.

Comparison Table

Aspect	Bremsstrahlung Radiation	Characteristic Radiation
Origin	Deceleration of electrons by the electric field of the nucleus.	Electron transitions between discrete energy levels in an atom.
Spectrum	Continuous spectrum with a range of energies.	Discrete lines corresponding to specific energies.
Dependence on Atomic Number (Z)	Less dependent on Z.	Highly dependent on Z; higher Z materials produce more characteristic radiation.
Energy range	Variable, depending on electron speed and target material.	Specific to the target material’s electron energy levels.
Applications	Primary source of X-rays in medical imaging.	Used to produce monochromatic X-rays for specialized imaging techniques.

Summary and Key Takeaways

X-rays are crucial for visualizing internal body structures, produced via Bremsstrahlung and characteristic radiation.
Contrast in X-ray imaging is essential for distinguishing different tissues, influenced by atomic number and X-ray energy.
Advanced concepts include mathematical modeling, contrast agents, and computational image reconstruction.
Safety measures and radiation dose management are paramount in minimizing health risks associated with X-ray exposure.
Interdisciplinary approaches enhance the development and application of X-ray imaging technologies.

Examiner Tip

Tips

Mnemonic for X-ray Interactions: "Photo Compton Absorption" helps remember the two main interaction types: Photoelectric Effect and Compton Scattering.

Study Tip: Create flashcards for key formulas like the Beer-Lambert Law and Hounsfield Units to reinforce your understanding and recall during exams.

Exam Strategy: When tackling problems on X-ray imaging, first identify the interaction mechanisms involved, then apply the relevant equations systematically to arrive at the solution.

Did You Know

Did you know that the first medical use of X-rays was just one year after their discovery by Wilhelm Röntgen in 1895? Additionally, the development of digital X-ray detectors has significantly reduced the radiation dose patients receive, enhancing both safety and image quality. Another fascinating fact is that dental X-rays use lower energy levels compared to medical X-rays, allowing for detailed images of teeth and surrounding structures with minimal exposure.

Common Mistakes

Mistake 1: Confusing Bremsstrahlung with characteristic radiation.
Incorrect: Believing Bremsstrahlung produces discrete energy lines.
Correct: Understanding that Bremsstrahlung results in a continuous spectrum, while characteristic radiation emits specific energies.

Mistake 2: Overlooking the impact of atomic number on the photoelectric effect.
Incorrect: Assuming all tissues absorb X-rays equally.
Correct: Recognizing that tissues with higher atomic numbers absorb more X-rays, enhancing image contrast.

Mistake 3: Ignoring the ALARA principle in dose management.
Incorrect: Using higher radiation doses than necessary for clearer images.
Correct: Minimizing radiation exposure while maintaining image quality by adhering to the ALARA guidelines.

FAQ

What is the primary difference between Bremsstrahlung and characteristic radiation?

Bremsstrahlung produces a continuous spectrum of X-ray energies due to electron deceleration, while characteristic radiation emits X-rays at specific energies corresponding to electron transitions in atoms.

How does contrast affect the quality of an X-ray image?

Higher contrast enhances the differentiation between different tissues, making it easier to identify structures and detect abnormalities in the X-ray image.

Why are iodine-based contrast agents commonly used in vascular imaging?

Iodine has a high atomic number, which increases X-ray absorption in blood vessels, enhancing the contrast and making vascular structures more visible in the images.

What safety measures are taken to protect patients from excessive radiation?

Measures include adhering to the ALARA principle, using shielding like lead aprons, optimizing X-ray energy and exposure time, and employing dose monitoring devices to minimize radiation exposure.

How does computed tomography (CT) differ from conventional radiography?

CT uses multiple X-ray measurements from different angles to create cross-sectional images, providing more detailed and three-dimensional views of internal structures compared to the two-dimensional images from conventional radiography.

1. Capacitance

1.1 Energy Stored in a Capacitor

1.1.1 Determine electric potential energy stored in a capacitor from the area under the potential–charge g

1.1.2 Recall and use W = ½QV = ½CV²

1.2 Discharging a Capacitor

1.2.1 Analyze graphs of potential difference, charge, and current during capacitor discharge

1.2.2 Recall and use τ = RC for the time constant during discharge

1.2.3 Use equations of the form x = x₀e^(-t / RC) for current, charge, or potential during discharge

1.3 Capacitors and Capacitance

1.3.1 Define capacitance for isolated spherical conductors and parallel plate capacitors

1.3.2 Recall and use C = Q / V

1.3.3 Derive formulae for combined capacitance of capacitors in series and parallel

1.3.4 Use capacitance formulae for capacitors in series and parallel

2. Nuclear Physics

2.1 Mass Defect and Nuclear Binding Energy

2.1.1 Sketch the variation of binding energy per nucleon with nucleon number

2.1.2 Explain nuclear fusion and nuclear fission

2.1.3 Calculate the energy released in nuclear reactions using E = c²∆m

2.1.4 Understand the equivalence between energy and mass (E = mc²)

2.1.5 Define and use the terms mass defect and binding energy

2.2 Radioactive Decay

2.2.1 Understand that fluctuations in count rate provide evidence for random decay

2.2.2 Understand that radioactive decay is spontaneous and random

2.2.3 Define activity and decay constant, and recall A = λN

2.2.4 Define half-life

2.2.5 Use λ = 0.693 / t₁/₂ for the half-life relationship

2.2.6 Understand exponential decay and use the relationship x = x₀e^(-λt)

3. Kinematics

3.1 Equations of Motion

3.1.1 Define and use distance, displacement, speed, velocity, acceleration

3.1.2 Use graphical methods to represent motion

3.1.3 Determine displacement from velocity–time graph

3.1.4 Determine velocity using gradient of displacement–time graph

3.1.5 Determine acceleration using gradient of velocity–time graph

3.1.6 Derive equations for uniformly accelerated motion

3.1.7 Solve problems of uniformly accelerated motion

3.1.8 Describe experiment to determine acceleration due to gravity

3.1.9 Explain motion with uniform velocity and perpendicular acceleration

4. Deformation of Solids

4.1 Stress and Strain

4.1.1 Understand and use the terms load, extension, compression, and limit of proportionality

4.1.2 Recall and use Hooke’s law

4.1.3 Recall and use the formula for spring constant k = F / x

4.1.4 Define and use terms stress, strain, and Young's modulus

4.1.5 Describe an experiment to determine Young’s modulus

4.1.6 Understand deformation caused by tensile or compressive forces

4.2 Elastic and Plastic Behaviour

4.2.1 Understand elastic and plastic deformation and elastic limit

4.2.2 Understand area under the force–extension graph as work done

4.2.3 Calculate elastic potential energy using EP = ½kx²

5. Gravitational Fields

5.1 Gravitational Field of a Point Mass

5.1.1 Understand that g is approximately constant for small height changes near Earth's surface

5.1.2 Recall and use g = GM / r²

5.1.3 Derive and use g = GM / r² for gravitational field strength

5.2 Gravitational Potential

5.2.1 Define gravitational potential as work done per unit mass in bringing a test mass from infinity

5.2.2 Use ϕ = -GM / r for gravitational potential due to a point mass

5.2.3 Use EP = -GMm / r for gravitational potential energy between two point masses

5.3 Gravitational Field

5.3.1 Define gravitational field as force per unit mass

5.3.2 Represent a gravitational field using field lines

5.4 Gravitational Force Between Point Masses

5.4.1 For point outside uniform sphere, treat mass as a point mass at its center

5.4.2 Analyze circular orbits in gravitational fields

5.4.3 Recall and use Newton's law of gravitation F = Gm₁m₂ / r²

6. Electricity

6.1 Resistance and Resistivity

6.1.1 Understand that the resistance of a thermistor decreases as temperature increases

6.1.2 Define resistance and recall and use V = IR

6.1.3 Sketch I–V characteristics for metallic conductor, semiconductor diode, and filament lamp

6.1.4 Explain that the resistance of a filament lamp increases as current increases

6.1.5 State Ohm’s law and recall and use R = ρL / A

6.1.6 Understand that the resistance of an LDR decreases as light intensity increases

6.2 Electric Current

6.2.1 Understand that an electric current is a flow of charge carriers

6.2.2 Understand that the charge on charge carriers is quantised

6.2.3 Recall and use Q = It

6.2.4 Use I = Anvq for current-carrying conductors

6.3 Potential Difference and Power

6.3.1 Define potential difference as energy transferred per unit charge

6.3.2 Recall and use V = W / Q

6.3.3 Recall and use P = VI, P = I²R, P = V² / R

7. D.C. Circuits

7.1 Practical Circuits

7.1.1 Recall and use the circuit symbols in the syllabus

7.1.2 Draw and interpret circuit diagrams using circuit symbols

7.1.3 Define electromotive force (e.m.f.) of a source as energy transferred per unit charge

7.1.4 Distinguish between e.m.f. and potential difference (p.d.)

7.1.5 Understand the effects of internal resistance on terminal potential difference

7.2 Kirchhoff’s Laws

7.2.1 Recall Kirchhoff’s first law: conservation of charge

7.2.2 Recall Kirchhoff’s second law: conservation of energy

7.2.3 Derive the formula for combined resistance of resistors in series using Kirchhoff’s laws

7.2.4 Use the formula for combined resistance of resistors in series

7.2.5 Derive the formula for combined resistance of resistors in parallel using Kirchhoff’s laws

7.2.6 Use the formula for combined resistance of resistors in parallel

7.2.7 Use Kirchhoff’s laws to solve simple circuit problems

7.3 Potential Dividers

7.3.1 Understand the principle of a potential divider circuit

7.3.2 Recall and use the principle of the potentiometer for comparing potential differences

7.3.3 Understand the use of a galvanometer in null methods

7.3.4 Explain the use of thermistors and LDRs in potential dividers to provide a potential dependent on te

8. Thermal Equilibrium

8.1 Thermal Energy Transfer

8.1.1 Understand that thermal energy transfers from higher to lower temperature

8.1.2 Understand that regions of equal temperature are in thermal equilibrium

9. Temperature Scales

9.1 Temperature Measurement

9.1.1 Understand physical properties that vary with temperature (e.g., density, gas volume, resistance)

9.1.2 Convert temperatures between Kelvin and Celsius, and recall T(K) = θ(°C) + 273.15

10. Magnetic Fields

10.1 Concept of a Magnetic Field

10.1.1 Understand that a magnetic field is a field of force produced by moving charges or permanent magnets

10.1.2 Represent a magnetic field using field lines

10.2 Force on a Current-Carrying Conductor

10.2.1 Understand that a force acts on a current-carrying conductor in a magnetic field

10.2.2 Recall and use F = BIL sin θ for the force on a current-carrying conductor in a magnetic field

10.2.3 Define magnetic flux density as the force per unit current per unit length on a wire at right angles

10.3 Force on a Moving Charge

10.3.1 Determine the direction of the force on a charge moving in a magnetic field

10.3.2 Recall and use F = BQv sin θ for the force on a moving charge in a magnetic field

10.3.3 Understand the origin of the Hall voltage and use the expression VH = BI / (ntq) for the Hall voltag

10.3.4 Understand the use of a Hall probe to measure magnetic flux density

10.4 Magnetic Fields Due to Currents

10.4.1 Sketch magnetic field patterns due to currents in a straight wire, flat coil, and solenoid

10.4.2 Understand that magnetic field in a solenoid is increased by a ferrous core

10.4.3 Explain the origin of forces between current-carrying conductors and determine the direction of the

10.5 Electromagnetic Induction

10.5.1 Define magnetic flux as the product of magnetic flux density and area perpendicular to flux directio

10.5.2 Recall and use Φ = BA for magnetic flux

10.5.3 Understand and use the concept of magnetic flux linkage

10.5.4 Explain experiments that show changing magnetic flux induces an e.m.f.

10.5.5 Recall and use Faraday’s and Lenz’s laws of electromagnetic induction

11. Specific Heat Capacity and Latent Heat

11.1 Specific Heat Capacity

11.1.1 Define and use specific heat capacity

11.2 Latent Heat

11.2.1 Define and use specific latent heat; distinguish between fusion and vaporisation

12. Dynamics

12.1 Momentum and Newton’s Laws of Motion

12.1.1 Mass resists change in motion

12.1.2 Recall F = ma and solve related problems

12.1.3 Define and use linear momentum

12.1.4 Force as rate of change of momentum

12.1.5 State and apply Newton’s laws

12.1.6 Describe weight as effect of gravitational field

12.1.7 Weight of an object is mass × gravitational acceleration

12.2 Non-uniform Motion

12.2.1 Understand frictional and drag forces

12.2.2 Describe motion in uniform gravitational field with air resistance

12.2.3 Objects moving against resistive force may reach terminal velocity

12.3 Linear Momentum and its Conservation

12.3.1 State conservation of momentum

12.3.2 Apply conservation of momentum to solve problems

12.3.3 For elastic collision, kinetic energy and relative speed are conserved

12.3.4 Momentum is conserved, but some kinetic energy may change

13. Medical Physics

13.1 Production and Use of Ultrasound

13.1.1 Understand that a piezo-electric crystal changes shape when a p.d. is applied and generates an e.m.f

13.1.2 Understand how ultrasound waves are generated and detected by a piezoelectric transducer

13.1.3 Understand how ultrasound reflection at boundaries provides diagnostic information about internal st

13.1.4 Define specific acoustic impedance as Z = ρc

13.1.5 Use the equation IR / I₀ = (Z₁ – Z₂)² / (Z₁ + Z₂)² for the intensity reflection coefficient

13.2 Production and Use of X-rays

13.2.1 Explain that X-rays are produced by electron bombardment of a metal target and calculate the minimum

13.2.2 Understand the use of X-rays in imaging internal body structures and the term 'contrast' in X-ray im

13.2.3 Recall and use I = I₀e^(-μx) for the attenuation of X-rays in matter

13.2.4 Understand how computed tomography (CT) produces 3D images by combining multiple 2D X-ray images

13.3 PET Scanning

13.3.1 Understand that a tracer contains radioactive nuclei and is introduced into the body for imaging

13.3.2 Understand that β+ decay is used in positron emission tomography (PET)

13.3.3 Understand that annihilation occurs when a particle interacts with its antiparticle, conserving mass

13.3.4 Explain how gamma-ray photons from annihilation are detected to create an image of tracer concentrat

14. Waves

14.1 Progressive Waves

14.1.1 Describe wave motion in ropes, springs, and ripple tanks

14.1.2 Understand and use the terms displacement, amplitude, phase difference, period, frequency, wavelengt

14.1.3 Use time-base and y-gain on a cathode-ray oscilloscope (CRO) to determine frequency and amplitude

14.1.4 Derive and use v = f λ for the wave equation

14.1.5 Recall and use v = f λ

14.1.6 Understand energy transfer by a progressive wave

14.1.7 Recall and use intensity = power / area, intensity ∝ (amplitude)²

14.2 Transverse and Longitudinal Waves

14.2.1 Compare transverse and longitudinal waves

14.2.2 Analyze and interpret graphical representations of transverse and longitudinal waves

14.3 Doppler Effect for Sound Waves

14.3.1 Understand the change in frequency when a sound source moves relative to a stationary observer

14.3.2 Use the expression f₀ = fₛ(v / (v ± vₛ)) for the observed frequency

14.4 Electromagnetic Spectrum

14.4.1 State all electromagnetic waves are transverse waves traveling at the same speed in free space

14.4.2 Recall the range of wavelengths from radio waves to γ-rays

14.4.3 Recall that wavelengths 400–700 nm are visible to the human eye

14.5 Polarisation

14.5.1 Understand that polarisation is a phenomenon associated with transverse waves

14.5.2 Recall and use Malus's law (I = I₀ cos²θ) to calculate intensity of a plane-polarised wave after pas

15. The Mole

15.1 The Mole

15.1.1 Understand that amount of substance is an SI base quantity with the unit mol

15.1.2 Use molar quantities where one mole contains Avogadro's constant of particles

16. Equation of State

16.1 Ideal Gas Law

16.1.1 Understand that a gas obeying pV ∝ T is an ideal gas

16.1.2 Recall and use the equation pV = nRT for an ideal gas

16.1.3 Recall pV = NkT, where N = number of molecules and k is Boltzmann constant

16.1.4 Use the relationship k = R / NA

17. Kinetic Theory of Gases

17.1 Kinetic Theory

17.1.1 State the basic assumptions of the kinetic theory of gases

17.1.2 Explain pressure exerted by a gas due to molecular movement

17.1.3 Derive and use pV = (3/2)NmkT for pressure of a gas

17.1.4 Compare pV = (3/2)NmkT with pV = NkT to deduce average kinetic energy of a molecule

18. Particle Physics

18.1 Atoms, Nuclei and Radiation

18.1.1 Infer the existence and small size of the nucleus from α-particle scattering

18.1.2 Describe the nuclear atom model: protons, neutrons, and electrons

18.1.3 Distinguish between nucleon number and proton number

18.1.4 Understand isotopes as forms of the same element with different neutrons

18.1.5 Use the notation AZX for nuclides representation

18.1.6 Understand conservation of nucleon number and charge in nuclear processes

18.1.7 Describe the composition, mass, and charge of α-, β-, and γ-radiations

18.1.8 Understand antiparticles and positrons as antiparticles of electrons

18.1.9 State that (electron) antineutrinos are produced during β- decay and neutrinos during β+ decay

18.1.10 Represent α- and β-decay using radioactive decay equations

18.1.11 Use unified atomic mass unit (u) for mass

18.2 Fundamental Particles

18.2.1 Understand quarks as fundamental particles with six flavours

18.2.2 Understand hadrons as baryons (three quarks) or mesons (one quark and one antiquark)

18.2.3 Describe changes in quark composition during β- and β+ decay

18.2.4 Describe protons and neutrons as composed of quarks

18.2.5 Recall and use the charge of each quark and its respective antiquark

18.2.6 Recall electrons and neutrinos as fundamental particles (leptons)

19. Internal Energy

19.1 Internal Energy

19.1.1 Understand that internal energy is the sum of kinetic and potential energies of molecules in a syste

19.1.2 Relate rise in temperature to an increase in internal energy

20. Forces, Density and Pressure

20.1 Turning Effects of Forces

20.1.1 Weight acts at a single point: centre of gravity

20.1.2 Define and apply the moment of a force

20.1.3 Understand the concept of a couple

20.1.4 Define and apply torque of a couple

20.2 Equilibrium of Forces

20.2.1 State and apply the principle of moments

20.2.2 System in equilibrium has no resultant force or torque

20.2.3 Use a vector triangle to represent coplanar forces in equilibrium

20.3 Density and Pressure

20.3.1 Define and use density

20.3.2 Define and use pressure

20.3.3 Derive equation for hydrostatic pressure ∆p = ρg∆h

20.3.4 Use the equation ∆p = ρg∆h

20.3.5 Understand upthrust as the effect of hydrostatic pressure

20.3.6 Calculate upthrust using F = ρgV (Archimedes' principle)

21. Astronomy and Cosmology

21.1 Standard Candles

21.1.1 Understand luminosity as the total power radiated by a star

21.1.2 Recall and use the inverse square law F = L / (4πd²) for radiant flux intensity

21.1.3 Understand that an object with known luminosity is a standard candle

21.1.4 Use standard candles to determine distances to galaxies

21.2 Stellar Radii

21.2.1 Recall and use Wien’s displacement law λmax ∝ 1 / T to estimate the surface temperature of a star

21.2.2 Use Stefan–Boltzmann law L = 4πσr²T⁴

21.2.3 Use Wien’s law and Stefan–Boltzmann law to estimate the radius of a star

21.3 Hubble’s Law and Big Bang Theory

21.3.1 Understand redshift and the increase in wavelength of light from distant objects

21.3.2 Use ∆λ / λ = ∆f / f = v / c for redshift

21.3.3 Explain why redshift suggests the Universe is expanding

21.3.4 Recall and use Hubble’s law v = H₀d to explain the Big Bang theory

22. First Law of Thermodynamics

22.1 First Law

22.1.1 Recall and use W = p∆V for work done when the volume of a gas changes at constant pressure

22.1.2 Understand the difference between work done by a gas and work done on a gas

22.1.3 Recall and use the first law of thermodynamics: ∆U = q + W

23. Alternating Currents

23.1 Characteristics of Alternating Currents

23.1.1 Understand and use terms period, frequency, and peak value for alternating current or voltage

23.1.2 Use x = x₀ sin(ωt) for sinusoidal alternating current or voltage

23.1.3 Recall that the mean power in a resistive load is half the maximum power for sinusoidal current

23.1.4 Distinguish between root-mean-square (r.m.s.) and peak values and recall I₀r.m.s = I₀ / √2 and V₀r.m

23.2 Rectification and Smoothing

23.2.1 Distinguish graphically between half-wave and full-wave rectification

23.2.2 Explain the use of a single diode for half-wave rectification

23.2.3 Explain the use of four diodes (bridge rectifier) for full-wave rectification

23.2.4 Analyze the effect of a capacitor in smoothing, including the effect of capacitance and load resista

24. Superposition

24.1 Stationary Waves

24.1.1 Explain and use the principle of superposition

24.1.2 Understand experiments demonstrating stationary waves using microwaves, stretched strings, and air c

24.1.3 Explain the formation of stationary waves using graphical methods and identify nodes and antinodes

24.1.4 Determine wavelength from the positions of nodes or antinodes

24.2 Diffraction

24.2.1 Explain diffraction and show understanding of related experiments

24.2.2 Understand the effect of gap width relative to wavelength in diffraction experiments

24.3 Interference

24.3.1 Understand the terms interference and coherence

24.3.2 Demonstrate two-source interference using water waves, sound, light, and microwaves

24.3.3 Understand the conditions required for two-source interference fringes

24.3.4 Recall and use λ = ax / D for double-slit interference with light

24.4 Diffraction Grating

24.4.1 Recall and use d sin θ = nλ for diffraction grating calculations

24.4.2 Describe the use of a diffraction grating to determine the wavelength of light

25. Simple Harmonic Oscillations

25.1 Simple Harmonic Motion

25.1.1 Understand and use terms displacement, amplitude, period, frequency, angular frequency, and phase di

25.1.2 Understand that simple harmonic motion occurs when acceleration is proportional to displacement from

25.1.3 Use a = -ω²x and recall x = x₀ sin(ωt) as the solution

25.1.4 Use v = v₀ cos(ωt) and v = ±ω√(x₀² - x²) for velocity

26. Energy in Simple Harmonic Motion

26.1 Energy in SHM

26.1.1 Describe the interchange between kinetic and potential energy during SHM

26.1.2 Recall and use E = ½mω²x₀² for the total energy of a system undergoing SHM

27. Quantum Physics

27.1 Energy and Momentum of a Photon

27.1.1 Understand that electromagnetic radiation has a particulate nature

27.1.2 Recall and use E = hf for the energy of a photon

27.1.3 Use the electronvolt (eV) as a unit of energy

27.1.4 Understand that a photon has momentum and use p = E / c for photon momentum

27.2 Photoelectric Effect

27.2.1 Understand that photoelectrons are emitted from a metal surface when illuminated by electromagnetic

27.2.2 Understand and use the terms threshold frequency and threshold wavelength

27.2.3 Explain photoelectric emission in terms of photon energy and work function

27.2.4 Recall and use hf = Φ + ½mv² for the maximum kinetic energy of photoelectrons

27.2.5 Explain why the maximum kinetic energy of photoelectrons is independent of intensity, while current

27.3 Wave-Particle Duality

27.3.1 Understand that the photoelectric effect shows the particulate nature of light, while diffraction sh

27.3.2 Describe and interpret electron diffraction as evidence for the wave nature of particles

27.3.3 Understand the de Broglie wavelength as the wavelength associated with a moving particle

27.3.4 Recall and use λ = h / p for de Broglie wavelength

27.4 Energy Levels in Atoms and Line Spectra

27.4.1 Understand discrete electron energy levels in atoms (e.g., atomic hydrogen)

27.4.2 Understand the appearance and formation of emission and absorption line spectra

27.4.3 Recall and use hf = E₁ – E₂ for the energy difference between electron energy levels

28. Damped and Forced Oscillations, Resonance

28.1 Damped Oscillations

28.1.1 Understand that damping occurs due to resistive forces

28.1.2 Understand the types of damping: light, critical, and heavy damping

28.2 Resonance

28.2.1 Understand that resonance occurs when an oscillating system is forced to oscillate at its natural fr

29. Work, Energy and Power

29.1 Energy Conservation

29.1.1 Understand the concept of work, and recall W = F × s

29.1.2 Apply the principle of conservation of energy

29.1.3 Understand efficiency as useful energy output / total energy input

29.1.4 Use efficiency concept to solve problems

29.1.5 Define power as work done per unit time

29.1.6 Solve problems using P = W / t

29.1.7 Derive P = Fv and solve problems

29.2 Gravitational Potential Energy and Kinetic Energy

29.2.1 Derive ∆EP = mg∆h for gravitational potential energy changes

29.2.2 Recall and use ∆EP = mg∆h for gravitational potential energy changes

29.2.3 Derive EK = ½mv² for kinetic energy

29.2.4 Recall and use EK = ½mv² for kinetic energy

30. Electric Fields

30.1 Electric Fields and Field Lines

30.1.1 Understand that an electric field is a field of force and define it as force per unit positive charg

30.1.2 Represent an electric field using field lines

30.2 Uniform Electric Fields

30.2.1 Recall and use E = ∆V / ∆d to calculate electric field strength between charged parallel plates

30.2.2 Describe the effect of a uniform electric field on the motion of charged particles

30.3 Electric Force Between Point Charges

30.3.1 Understand that, for a point outside a spherical conductor, the charge may be considered a point mas

30.3.2 Recall and use Coulomb’s law F = Q₁Q₂ / (4πε₀r²) for the force between two point charges

30.4 Electric Field of a Point Charge

30.4.1 Recall and use E = Q / (4πε₀r²) for the electric field strength due to a point charge

30.5 Electric Potential

30.5.1 Define electric potential as work done per unit positive charge in bringing a test charge from infin

30.5.2 Recall and use V = Q / (4πε₀r) for electric potential due to a point charge

30.5.3 Understand how electric potential leads to electric potential energy of two point charges and use EP

31. Physical Quantities and Units

31.1 Physical Quantities

31.1.1 Physical quantities consist of magnitude and unit

31.1.2 Estimate physical quantities from the syllabus

31.2 SI Units

31.2.1 SI base units: mass, length, time, current, temperature

31.2.2 Express derived units from SI base units

31.2.3 Check homogeneity of physical equations

31.2.4 Use prefixes (pico, nano, micro, kilo, etc.)

31.3 Errors and Uncertainties

31.3.1 Understand systematic and random errors

31.3.2 Assess uncertainty in derived quantities

31.4 uniform Electric Fields

31.4.1 Distinguish between precision and accuracy

31.5 Scalars and Vectors

31.5.1 Difference between scalar and vector quantities

31.5.2 Add and subtract coplanar vectors

31.5.3 Represent a vector as components

32. Motion in a Circle

32.1 Centripetal Acceleration

32.1.1 Understand centripetal acceleration and its role in circular motion

32.1.2 Recall and use a = rω² and a = v² / r

32.1.3 Recall and use F = mrω² and F = mv² / r

32.1.4 Understand force causing centripetal acceleration is always perpendicular to motion

32.2 Kinematics of Uniform Circular Motion

32.2.1 Recall and use ω = 2π / T and v = rω

32.2.2 Understand and use angular speed

32.2.3 Define and express angular displacement in radians

Get PDF

PDF

Explore

Your Flashcards are Ready!

Understand the Use of X-rays in Imaging Internal Body Structures and the Term 'Contrast' in X-ray Imaging

Introduction